NETGEAR GA621 manual Load nwconfig

To install the NetWare driver software:

1. At the System Console, type:

load nwconfig

The NetWare Configuration Options dialog box opens.

2.Select the “Driver Options (load/unload disk and network drivers)” option. The Driver Options dialog box opens.

3.Select the “Configure network drivers” option. The Additional Driver Actions dialog box opens.

4.Select the “Load an additional driver” option. The Select a driver dialog box opens.

5.Press the Insert key to install an unlisted driver. An instruction window opens.

6.Press the F3 key to specify a different path. The Specify a directory path dialog box opens.

7.Make sure the GA621 Fiber Gigabit Ethernet Adapter Driver and Documentation CD is inserted in the CD-ROM drive and type in the path to

the driver directory on the CD. (For example, if your CD-ROM's drive letter is “D”, you would type the following:

D:\Netware\

The Scanning for available drivers window appears for a short period of time, and then the “Select a driver to install” dialog box opens with “Ga621.LAN NETGEAR GA621 Gigabit Fiber Adapter” selected.

NetWare driver software 6-3