Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311
Figure 3-3: Settings tab page
b.Click the Settings tab to display the view shown above.
c.Select
d.Enter the SSID for the
e.Click Apply.
2.Save your settings in a Profile.
a.Type a descriptive name for the Profile Name.
b.Click Save Profile. All the configuration settings are saved in this profile.
c.Click Apply.
d.Click Close to exit the configuration utility.
3.Configure the PC network settings.
a.Configure each PC with either a static IP address or with the IPX protocol.
Note: For instructions on configuring static IP addresses or the IPX protocol, refer to the networking tutorial on your NETGEAR 54 Mbps Wireless PCI Adapter WG311 Resource CD.
b.Restart the PCs.
4.Verify wireless connectivity between your peer devices. Verify connectivity by using the Ping program:
a.On the Windows taskbar click the Start button, and then click Run.
Configuration |