NETGEAR WG311 manual Configuring Windows 2000 or XP for TCP/IP Networking

Page 62

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311

2.Type winipcfg, and then click OK.

The IP Configuration window opens, which lists (among other things), your IP address, subnet mask, and default gateway.

3.From the drop-down box, select your Ethernet adapter.

The window is updated to show your settings, which should match the values below if you are using the default TCP/IP settings that NETGEAR recommends for connecting through a router or gateway:

•The IP address is between 192.168.0.2 and 192.168.0.254

•The subnet mask is 255.255.255.0

•The default gateway is 192.168.0.1

Configuring Windows 2000 or XP for TCP/IP Networking

As part of the PC preparation process, you may need to install and configure

TCP/IP on each networked PC. Before starting, locate your Windows CD; you may need to insert it during the TCP/IP installation process.

Install or Verify Windows Networking Components

To install or verify the necessary components for IP networking:

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Network and Dial-up Connections icon.

3.If an Ethernet adapter is present in your PC, you should see an entry for Local Area Connection. Double-click that entry.

4.Select Properties.

5.Verify that ‘Client for Microsoft Networks’ and ‘Internet Protocol (TCP/IP)’ are present. If not, select Install and add them.

6.Select ‘Internet Protocol (TCP/IP)’, click Properties, and verify that “Obtain an IP address automatically is selected.

7.Click OK and close all Network and Dial-up Connections windows.

8.Then, restart your PC.

C-6	Preparing Your PCs for Network Access

Image 62

Contents NETGEAR, Inc Technical Support FCC Information to User Export Restrictions Page Page Contents Appendix C Preparing Your PCs for Network Access Glossary Contents About the Netgear 54 Mbps Wireless PCI Adapter WG311 Key Features and Related Netgear ProductsRoad Map for ‘How to Get There From Here’ What’s in the Box?Road Map for How to Get There From Here Netgear 54 Mbps Exchange files Use printers What You Will Need Before You Begin Verify System RequirementsTwo Basic Operating Modes Observe Location and Range GuidelinesWG311 Default Wireless Configuration Settings Install the WG311 software Basic Installation InstructionsFor Windows XP Users Installing a WG311 Install the Netgear 54 Mbps Wireless PCI Adapter WG311 Configure your WG311 Verify wireless connectivity to your network Open the WG311 utility by clicking on the iconFor Windows 2000 & 98/Me Users Installing a WG311 Task bar Configure your WG311 and save ProfileVerify wireless connectivity to your network WG311 Wireless Connection Indicators Interpreting System Tray Icon ColorsBasic Troubleshooting Tips About About page shows the following informationBasic Setup Basic Setup Understanding the Configuration Options Using Configuration ProfilesNetworks Networks page displays the following fieldsRun the WG311 Configuration Utility Connect to an Access Point in Infrastructure ModeHow to Configure an Infrastructure Mode Profile Configure the wireless Network settings Save your settings in a ProfileConnecting to Another PC in Ad-Hoc Mode How to Configure an Ad-Hoc Mode ProfileConfigure the PC network settings How to Start a Computer-to-Computer Ad-Hoc Network Enabling Wireless Security Features Ad-Hoc SettingConfiguration How to Configure WEP Encryption Security Configure the Security settingsSave your settings in a Profile Statistics Statistics tabAdvanced Settings Advanced SettingsConfiguration Appendix a Technical Specifications Technical Specifications Wireless Networking Overview Infrastructure ModeNetwork Name Extended Service Set Identification Essid Authentication and WEPAd-Hoc Mode Peer-to-Peer Workgroup Authentication Open System AuthenticationPoint This process is illustrated in below Authentication Shared Key Steps WEP Configuration Options Key SizeWireless Channels Radio frequency channels used are listed in Table Preparing Your Computers for TCP/IP Networking Configuring Windows 98 and Me for TCP/IP NetworkingInstall or Verify Windows Networking Components Preparing Your PCs for Network Access Choose Settings, and then Control Panel Locate your Network Neighborhood iconPrimary Network Logon is set to Windows logon Selecting the Internet Access Method Verifying TCP/IP PropertiesConfiguring Windows 2000 or XP for TCP/IP Networking Dhcp Configuration of TCP/IP in Windows XP or Dhcp Configuration of TCP/IP in Windows XPTCP/IP details are presented on Support tab Right click on Local Area Connection and select Properties Dhcp Configuration of TCP/IP in WindowsVerify that Obtain an IP address Obtain an IP address automatically is selected Verifying TCP/IP Properties for Windows XP or Preparing Your PCs for Network Access Glossary List of Glossary TermsDSL Internet service provider Ssid Wins Glossary Numerics Bssid Essid