Clarion DXZ835MP Setting the Subwoofer, Setting LOW Pass Filter, AUX function, Setting the clock

Operations Common to Each Mode

Anti-theft indicator Selecting AUX IN sensitivity

English

The red Anti-theft indicator is a function for pre- venting theft. When the DCP is removed from the unit, this indicator blinks.

∗The factory default setting is “OFF”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “BLINK LED”.

3.Turn the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.

4.Press the [T] button to return to the previous mode.

Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “AUX SENS”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.

4.Press the [T] button to return to the previous mode.

Setting the Subwoofer

∗The factory default setting is “SUB-W ON”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “SUB-WOOFER”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.

4.Press the [T] button to return to the previous mode.

Setting LOW PASS FILTER

∗The factory default setting is “THRGH”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “SUB-W LPF”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

THRGH ➜ LPF 50 ➜ LPF 80 ➜ LPF 120

4.Press the [T] button to return to the previous mode.

AUX function

This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.

Triggered audio mute for cellular telepones

This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car.

∗This function is not compatible with all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.

Setting the clock

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “CLOCK”.

3.Press the [] button.

4.Press the [a] or [d] button to select the hour or the minute.

5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

6.Press the [] button to store the time into memory.

7.Press the [T] button to return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is re- set. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

22 DXZ835MP