Clarion DXZ835MP Basic Operations, Adjusting the bass, Adjusting the Treble, Adjusting the MID

Basic Operations

●When the BEQ (BASS BOOST, IMPACT, EXCITE) is set

“BASS BOOST” ( IMPACT, EXCITE) ➜ “BALANCE” ➜ “FADER” ➜ Function mode...

●When the BEQ (USER CUSTOM) is set

“BASS” ➜ “MID” ➜ “TREBLE” ➜

“BALANCE” ➜ “FADER” ➜ Function mode…

●When the TONE BYPASS is set

“BALANCE” ➜ “FADER” ➜ Function mode…

∗Pressing the [BEQ] button for 1 second or longer while in “USER CUSTOM” sets flat, and displays a “BEQ FLAT” message.

Note:

•When the separately-sold digital sound processor (DVH920) is used, the bass and treble tone adjustments cannot be selected.

Adjusting the bass

The bass gain, bass F (center frequency) and bass Q can be adjusted as follows.

1.Press the [A-M] button and select “BASS GAIN ”.

2.Press the [a] or [d] button and select

from “BASS GAIN” ➜ “BASS F 50 ” ➜ “BASS Q 1 ” ➜ “BASS GAIN”.

3.Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain, the F (center frequency) and the Q.

BASS GAIN : –6 to 8 (The factory default setting is “0”)

BASS F : 50Hz/80Hz/120Hz (The factory default setting is “50”)

BASS Q : 1/1.25/1.5/2 (The factory default setting is “1”)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

MID GAIN : –6 to 6 (The factory default setting is “0”)

MID F : 700Hz/1KHz/2KHz (The factory default setting is “1k”)

MID Q : 1.5/2 (The factory default

setting is “2”)

4.When the adfustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the TREBLE

The treble gain and treble F (center frequency) can be adjusted as follows.

1.Press the [A-M] button and select “TREB GAIN”.

2.Press the [a] or [d] button and select

from “TREB GAIN” ➜ “TREB F 12K ” ➜ “TREB GAIN ”.

3.Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain and the F (center frequency).

TREB GAIN : –6 to 6 (The factory default setting is “0”)

TREB F : 8KHz/12KHz (The Factory default setting is “12K”)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BALANCE”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

English

Adjusting the MID

The MID gain, MID F (center frequency) and MID Q can be adjusted as follows.

1.Press the [A-M] button and select MID GAIN.

2.Press the [a] or [d] button and select

from “MID GAIN” ➜ “MID F 1k” ➜ “MID Q 2 ” ➜ “MID GAIN ”.

3.Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain, the F (center frequency) and the Q.

Adjusting the fader

1.Press the [A-M] button and select “FADER”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

DXZ835MP 13