The Admin Tab
Device Name: | This is the name that the NP5410 will use to identify |
| itself to external configuration and |
| programs. This is not the same as the SSID. It is okay to |
| leave this blank if you are not using these programs. |
IP Address Mode: | Select 'DHCP' to get the IP settings from a DHCP server |
| on your network. Select 'Static' to use the IP settings |
| specified on this page. |
Default IP address: | Enter the static IP of ethernet NP5410. The default IP is |
| “192.168.1.100”. |
Default subnet mask: | The subnet mask you want to assign for the NP5410. |
| The default value is “255.255.255.0”. |
Default Gateway: | The gateway you want to assign for the NP5410. The |
| default value is “192.168.1.1”. |
User name: | This is the user name that you must type when logging |
| in to these web pages. |
Administrator password: | This is the password that you must type when logging |
| in to these web pages. You must enter the same |
| password into both boxes, for confirmation. |
www.netcomm.com.au | Rev. 1 - YML675 |
Page 20 | NP5410 Wireless Ethernet Bridge User Guide |