NetComm NP5410 manual Physical Details, Rear Panel

Page 5

Physical Details

Rear Panel

Antenna Connection

INIT Button

Selection Switch

LAN Cable

Power Input

INIT Button

“INIT” means “Initiation”. Press and hold this button

 

to reboot and reset the current configuration to factory

 

default settings. The left indicator “DIAG” on NP5410

 

will be off and then begin blinking. This initiation action

 

will be completed when the indicator “DIAG” light is

 

always green instead of blinking.

LAN Cable Selection Switch

 

X Crossover:

The RJ-45 port Tx and Rx lines will be reversed. Use

 

this setting when you are connecting the supplied

 

straight through ethernet cable directly to a PC.

II Straight:

The RJ-45 port Tx and Rx lines are normal. Use this

 

setting when you are connecting the supplied straight

 

through ethernet cable directly to a Hub or Switch.

Power Input

Use the power adapter supplied with the NP5410

LAN

Use standard Ethernet cable (RJ-45 connector) to

 

connect your PC, hub/switch or broadband router/

 

modem to this LAN port.

Rev. 1 - YML675

www.netcomm.com.au

NP5410 Wireless Ethernet Bridge User Guide

Page 5

Image 5
Contents Page Contents Introduction Package ContentsWireless Features NP5410 Wireless Ethernet Bridge FeaturesLAN Features Configuration & ManagementRear Panel Physical DetailsField Setting Details Factory DefaultsLED Indications Hardware Installation Ad-hoc Networking Connecting the NP5410 to Your NetworkLAN Wireless Navigator Installation Rev YML675 Rev YML675 NP5410 Wireless Ethernet Bridge User Guide Startup and Login Info Tab Configuring the NP5410User of Dhcp of router Setup Tab Security Tab WEP key 1 ~ Admin Tab Rev YML675 NP5410 Wireless Ethernet Bridge User Guide Firmware Upgrade Procedure My PC can’t locate the Wireless Ethernet Adapter FAQ & TroubleshootingWhat is the Ieee 802.11g draft? ESS-ID GlossaryRev YML675 Product Specifications Trademarks and Notices Registering your NetComm ProductWarranty Registration Form Page Limitations of Warranty Product Warranty

NP5410 specifications

The NetComm NP5410 is an advanced, dual WAN broadband router designed to meet the needs of users requiring reliable and high-speed internet connectivity. This device is primarily aimed at small to medium-sized businesses that demand uninterrupted service and enhanced network performance.

One of the standout features of the NP5410 is its dual WAN capability, which allows it to connect to two separate internet services simultaneously. This not only provides a failover option ensuring consistent uptime but also enables load balancing to optimize bandwidth usage across multiple connections. The router supports various WAN types, including DSL, cable, and 3G/4G LTE, providing flexibility for different network environments.

Equipped with high-performance hardware, the NP5410 boasts a powerful processor that supports high-speed data processing and multiple concurrent connections. It also features advanced Quality of Service (QoS) settings that prioritize network traffic for critical applications, guaranteeing smooth performance during peak usage times.

Security is a crucial aspect of the NP5410, as it comes with built-in firewall capabilities, and supports VPN protocols, including IPsec and PPTP. This enables secure remote access for employees working from home or on the go. Additionally, the router has authentication features, ensuring that only authorized users can connect to the network, which helps protect sensitive data.

The NP5410 also supports wireless connectivity with dual-band Wi-Fi, providing coverage for both 2.4GHz and 5GHz frequencies. This dual-band functionality allows users to connect a wide range of devices with varying performance needs, from older devices on the 2.4GHz band to modern devices that benefit from the higher speeds available on the 5GHz band. Moreover, the router incorporates the latest Wi-Fi standards, including802.11ac, which enhances wireless performance and range.

For ease of management, the NetComm NP5410 features a user-friendly web interface, allowing administrators to easily configure settings, monitor network performance, and troubleshoot issues as they arise. Integration with remote management tools is also supported, making it convenient for IT personnel to manage devices across multiple locations.

In summary, the NetComm NP5410 is a robust broadband router that combines dual WAN capabilities, high-speed performance, strong security features, and user-friendly management tools. Its design and technologies make it an ideal choice for businesses requiring reliable and efficient network solutions.