The Assoc Tab
The Assoc Tab displays all the wireless clients, which are currently associated with this AP.
Mac address: | Displays the list of the MAC address of associated wireless |
| client.If you click the refresh button of your web browser, |
| then the list will be updated. |
The Wireless Tab
The Wireless Tab lets you select the network settings.
Performance Mode: | In Maximum interoperability mode, the AP will accept |
| connections to both 802.11b and 802.11g client devices. In |
| Maximum performance mode, the AP will only connect to |
| 802.11g client devices for better performance. |
Wireless Network Name (SSID): | Lets you set the Service Set Identification. Default SSID is |
| "wireless". This should be changed to some thing non- |
| descriptive. |
Channel: | Enables you to select a transmission channel. This setting |
| only works in infrastructure mode. |
Transmission Rate: | Select transfer rate from an available list. |
Note: Click button "Save" to store the settings. The settings will work after AP automatically reboots.
Rev. 1 - YML668 | www.netcomm.com.au |
NP5400 11g Wireless Access Point User Guide | Page 17 |