The Front Panel
LED | Color | Status | Description |
Power | Green | ON | The AP power on |
|
| OFF | The AP power off |
DIAG | Green | ON | 1) The AP is in normal operation mode |
|
|
| 2) While in firmware upgrade process, it indicates |
|
|
| the AP is writing the firmware into Flash ROM |
|
| Blinking | 1) The AP is in |
|
|
| 2) While in firmware upgrade process, it indicates |
|
|
| the AP is waiting the Wireless Navigator sending |
|
|
| firmware image |
|
| OFF | 1) The AP starts to boot up the system. |
|
|
| 2) While in firmware upgrade process, it |
|
|
| indicates the firmware upgrade process is |
|
|
| finished. |
LAN | Green | ON | The LAN port has a successful physical link. |
|
| Blinking | Sending or receiving data |
|
| OFF | No connection, and neither data forwarding from |
|
|
| LAN ports. |
WLAN | Green | ON | Wireless port is connected with another wireless |
|
|
| device(s) successfully |
|
| OFF | Wireless port is not connected to any device. |
|
| Blinking | Sending or Receiving data via wireless |
Rev. 1 - YML668 | www.netcomm.com.au |
NP5400 11g Wireless Access Point User Guide | Page 7 |