NetComm NP5400 manual IP Address Tab

The IP Address Tab

The IP Address Tab displays IP settings options on this AP.

IP Address Mode:	Select "Static" or "DHCP" mode. For "Static" mode, the IP
	address settings are given by user. For "DHCP" mode, these
	settings will be overridden by a DHCP server on your
	network. The default setting is "Static"
Default IP Address:	The static IP address you want to assign to the AP. The
	default value is "192.168.1.100".
Default subnet mask:	The subnet mask you want to assign for the AP. The default
	value is "255.255.255.0".
Default gateway:	The internet gateway you want to assign for the AP. The
	default value is "192.168.1.1".
Access point name:	With the name, the AP can be found easily via Wireless
	Nevigator Utility. It can be the nickname assigned by the
	adminstrator.

Note: Click button "Save" to store the settings. The settings will work after AP automatically reboots.

www.netcomm.com.au	Rev. 1 - YML668
Page 20	NP5400 11g Wireless Access Point User Guide