NComputing L100, L200, L120 manual Router, Refer to the following, Turn on the PC Expanion

Part 3

Setting up Network configuration

Connecting to the network by using a cable or DSL

3 Select the ‘Network’ tab. Then Select ‘Get Dynamic IP address’ and

router

click the <Save> button. (The PC Expanion uses the “Get Dynamic IP

address” option as the default. No additional settings are required.)

You need to configure the network to connect with any PC Expanion

terminal(s). To configure your computer's network configurations, please

refer to the following :

If you use a Cable/DSL router, you can use dynamic IP addresses. (To use

dynamic IP addresses, the router must support DHCP or a dynamic IP

address allocation function) If you want to use static IP addresses when

using a Cable/DSL router, refer to “Connecting by using a switch.”

1

Turn on the PC Expanion.

4 With the L120 and L200 models, the list of host computers is

2

Click the <Setup> button on the startup screen of the PC Expanion.

displayed in the startup screen of the PC Expanion. The other

products require using the “Connection to” drop-down list. If the

user clicks either <TS Options> within <Setup> or <Options>

within <Setup> after selecting “Autodetection,” the host computer

name is displayed automatically. The name of the host computer

will be displayed for up to 8 host computers. Click the <Connect>

button. Start using the PC Expanion.