2Click the <Connection Settings> icon in the ‘UTMA/UTSA Setup view.’
3Select either ‘TS 2’ or ‘TS 3’ from the ‘Host Computer List to Connect to,’ click the <Apply> button and then click the <Edit> button. To connect to a specified host computer automatically, there must be one host computer in the <Connection to> list on the PC Expanion’s initial screen. If ‘Autodetection’ is selected in the ‘Host Computer List to Connect to,’ select ‘Autodetection’ and click the
4Input the IP address of the host PC in the “Terminal Server network address” column of “Edit Connection Profile” window. Then click the <OK> button. Refer to ‘3. How to check the IP address setting of host PC” in Part 8.
5Select the host PC that the PC Expanion is connected to automatically in the