ADSL Modem - USB
Step 2: Configuring the NB1300Plus4
After connecting all the ADSL Router cables you can either configure your NB1300Plus4 using the Easy Config software provided (Refer to page 9) or complete the following manual configuration instructions:
a.Power on the ADSL Router and launch a web browser, such as Internet Explorer or Netscape Navigator, browse to the address http://192.168.1.1.
b.Enter the correct user name and password to access the Configuration tool. The default user name and password are as below.
User Name : admin
Password : password
Note: You must click the Submit button on every page that you make changes on and when you have made all your changes click the Save Setting and Reboot button from the bottom of the menu.
c. Click on the One Page Setup link under the Basic menu.
You will need to Change your WAN and VC settings as provided by your ISP. The following lists an example of the most common ISP settings used in Australia. The fields that require changing from the default settings are highlighted.
www.netcomm.com.au | Rev. 1- YML674 |
Page 20 | NB1300Plus4 ADSL Modem |