English
7. OPERATIONS OF ACCESSORIES
USB Operations
USB memory device operation
Note:
•The following operations are the same as for CD mode:
∗Pause
∗Track selection
∗Scan play
∗Repeat play ∗Random play ∗Folder selection ∗List search function
See “CD/MP3/WMA/AAC Operations” (page 16- 19) for details.
About USB memory
•USB is an acronym for Universal Serial Bus, and refers to an external bus standard supporting data transfer rates of 12 Mbps.
•This unit is compatible with USB 1.1/2.0 with maximum data transfer rates of 12 Mbps.
•USB memory devices that can be played by connecting to the unit’s USB cable are limited to those recognized as “USB mass storage class devices”; operation is not guaranteed with all USB memory devices.
∗Devices compatible with “USB Mass Storage Class” can be used merely by connecting to the host device, without need for special drivers or application software.
•Consult the manufacturer of your USB memory device for information regarding whether it is supported by “USB Mass Storage Class” standards.
•Audio files playable on this unit are limited to MP3/WMA/AAC files. For details, see the section “MP3/WMA/AAC” (page 16).
•To prevent the accidental loss of data, always back up important data on your computer.
•This unit does not support connections to a computer. In addition, connections made through a USB hub device are also not supported.
•When a USB memory device is composed of two or more drives, only one of the drives will be detected.
•USB memory devices with security functions cannot be played.
•Do not connect an iPod to the USB connector, since playback and controls may not function properly. To connect an iPod, use the CeNET iPod interface. For details, see the section “iPod BB Operations” (page 26).
•The order in which tracks are recorded may differ depending on the USB memory device connected (the actual playback order may not be the same as that indicated on your computer’s display).
CAUTION
•Insert and remove a USB memory device only when the device is not being accessed. Connecting or disconnecting the device at the following times may result in the loss of data:
-If the USB memory device is removed or power is disconnected during writing to the device.
-When the device is subjected to static electricity or electric noise.
•Do not leave a USB memory device unattended in an automobile. Exposure to direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device.
24 DXZ675USB