Basic Operations
Adjusting MAGNA BASS EXTEND | Adjusting Sound Mode |
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
1.Press and hold the [ 
] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect.
2.Press and hold the [ 
] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect.
∗The adjustment can only be performed when the DZE is set to “DZE OFF”.
∗The factory default setting is off.
Mute
Use this function to turn off the sound immediately.
1.Press the [
] button.
The sound turns off and “MUTE” blinks in the display.
2.Press the [
] button again to cancel the mute mode.
To change sound mode
1.Press the [ 
] button and select the sound mode to adjust.
2.Push the [SEEK PANEL] leftward or rightward to select the “item name”.
“TREBLE” ↔ “S RESTORER” ↔ “HPF” ↔ “S-W LPF” ↔ “BALANCE” ↔ “FADER”
3.Push the [P.CH] button upward or downward to select the “desired setting value”.
∗In the case of item names appearing with the “ENT” suffix after the item name, the
[ 
] button must be pressed to display the setting value.
∗“BASS” and “TREBLE” can be adjusted only when “DZE” is set to “DZE OFF” (page 12).
∗After completing settings, press the [ 
] button to return to the previous mode.
Note:
•During sound adjustment mode, if no operation is performed for more than 10 seconds, this mode can be canceled and return to the previous mode.
English
●Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s subwoofer output terminal.
∗The factory default setting is “0”. (Setting range: +5 to
DXZ675USB 11