Clarion DXZ675USB owner manual Error Displays

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
CD/MP3/WMA/AAC	ERROR 2	A CD is caught inside the CD	This is a failure of CD deck’s mechanism and consult
		deck and is not ejected.	your store of purchase.
	ERROR 3	A CD cannot be played due	Replace with a non-scratched, non-warped-disc.
		to scratches, etc.
	ERROR 6	A CD is loaded upside-down	Eject the disc then reload it properly.
		inside the CD deck and does
		not play.
	ERROR 2	A CD inside the CD changer	This is a failure of CD changer’s mechanism and
changer		is not loaded.	consult your store of purchase.
	ERROR 3	scratches, etc.	Replace with a non-scratched, non-warped disc.
		A CD inside the CD changer
		cannot be played due to
CD
	ERROR 6	A CD inside the CD changer	Eject the disc then reload it properly.
		cannot be played because it
		is loaded upside-down.
	ERROR 2	A DISC inside the DVD	This is a failure of DVD mechanism and consult your
		changer cannot be played.	store of purchase.
changer	ERROR 3	A DISC cannot be played due	Retry or replace with a non-scratched, non-warped-
		to scratches, etc.	disc.
	ERROR 6	A DISC inside the DVD	Eject the disc then reload it properly.
DVD		changer cannot be played
		down.
		because it is loaded upside-
	ERROR P	Parental level error	Set the correct Parental level.
	ERROR R	Region code error	Eject the disc and replace correct region code disc.
	ERROR 1	A communication error	Disconnect the iPod, then connect it again.
iPod		occurs between the iPod and
		the iPod CeNET Controller.
	NO IPOD	There is no iPod connected.	Please connect the iPod.
	ERROR 1	Device mechanism is	The unit’s mechanism may be damaged. Consult
		damaged.	your dealer.
USB	NO FILE	USB memory device contains	Insert USB memory device containing audio files.
		no audio files.
	DSP ERROR	USB connector is short-	Disconnect USB memory device, then hold [SRC]
		circuited or USB memory	button depressed to turn power OFF. Then press
		device is overloaded.	[SRC] button once again to turn power ON.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

English

DXZ675USB 35