ADSL2+ Router

Mac User Guide

Mac

Set-up

(cont)

12.Click on the TCP/ IP tab. The TCP/IP settings will be displayed. Click on the “ConfigureiPV4” pop-up menu and select “Using DHCP”. Click on Apply Now to save the changes.

Your dialog box should now look like this:

13.If your Mac does not accept an IP address from the DHCP server in your NB6Plus4W and the IP address field remains blank, try selecting “Using DHCP with manual address” from the “Configure iPV4” pop-up menu and entering 192.168.1.3 in the “IP address” field.

14.Click on the “Show” pop-up menu and select “Network Status”. Check to see that the bullet alongside “Airport” is green.

15.Close the Network window by clicking the red close button (System 10.3 and 10.4) or select “Quit System Preferences” under the “System Preferences” menu (System 10.2).

NB6Plus4W – 11