NetComm NB600W manual

Page 14

3. Click the IP Address tab. Select “Obtain an IP address automatically”.

4.Now click the Gateway tab, and verify that the Installed Gateway ﬁeld is blank. Click the OK button.

5.Click the OK button again. Windows may ask you for the original Windows installation disk or additional ﬁles. Check for the ﬁles at c:\windows\options\cabs, or insert your Windows CD-ROM into your CD-ROM drive and check the correct ﬁle location, e.g., D:\win98, D:\win9x, etc. (If “D” is the letter of your CD-ROM drive).

6.Windows may ask you to restart your PC. Click the Yes button. If Windows does not ask you to restart, restart your computer anyway.

NB600W Super-G Wireless Broadband Gateway User Guide	YML775 Rev1
14	www.netcomm.com.au

Image 14

Contents Page Important rules for safe operation Legal & Regulatory InformationCustomer Information NB600W Super-G Wireless Broadband Gateway User Guide Contents Introduction Product OverviewFeatures and benefits NetComm NB600W Super-G Wireless GatewayWhat’s in the package? Connect the Power Cable Connecting the NetComm Super-G Wireless GatewayConnecting your Gateway Connect the Ethernet Cables1 NB600W Front Panel 2 NB600W Back Panel Factory DefaultDevice Log-in Default Values Management / Gateway AddressConfiguring your Computers OverviewConfiguring Windows 98 and Millennium PCs Page Configuring Windows 2000 PCs Page Configuring Windows XP PCs Page Http//192.168.1.1 Configuring the Wireless GatewayAccessing the Configuration Manager Basic Configuration Internet PortUse Static DNS Dhcp ConfigurationHost Name/Domain Name MAC addressService Name PPPoE ConfigurationPassword &Confirm Password Packet Size MTUField Gateway Static IP ConfigurationIP Address Primary DNSServer IP Pptp ConfigurationPassword & Confirm Password Default value is 1492 Bytes. If your ISP requires a Number of IP address Local PortStart IP address Wins Server Lease TimeStatic Dhcp IP & MAC Address Region Wireless LANHide Ssid ChannelEnable Wireless Access List Security ModeWPA Pre-Shared Key Ral Key Integrity Protocol. Tkip utilizes a stronger802.1x Radius User Group Advanced Setup Access Control ListAdvanced Items ApplicationEvery IP address This IP address IP Address Range Define Group OptionsGroup Name Protocol Define Application OptionsApplication name Port Range/Port NumberBlock URLs With IP Address Advanced Setup Content filteringBlock URLs By Keyword Block Java AppletsSchedule Block CookiesBlock Download File Trust UserAdvanced Setup Dynamic DNS Update Status Advanced Setup Firewall Email Alarm Options Time Return AddressMail log Web Management Port Advanced Setup Remote ManagementPassword, Confirm Password Allow Management from PC Send System Log to this PCAdvanced Setup Static Routes Destination Network / HostAdvanced Setup UPnP Enable UPnPAdvanced Setup Virtual Server Server IP addressPort Range Port NumberManagement Access Log ManagementManagement Factory Reset NB600WManagement Firmware Upgrade Connect/Renew Management Network StatusRefresh Disconnect/ReleaseUser List Session ListManagement Save Configuration Management Time Appendix a Technical Specifications Dimensions & Weight HardwareSoftware Wireless SecurityWeb Contents Filtering Networking /Transport layer protocolManagement What is Dynamic DNS? Why Dynamic DNS? What is Wildcard? What is a dynamic IP address?What is DMZ? Appendix B Frequent Asked QuestionsWhat is MTU? What’s MX Mail Exchanger? And why MX?What is PPPoE PPP Over Ethernet? Refresh your IP address MS Windows Appendix C TroubleshootingCannot access the Internet IP address conflictAppendix D Ddns Update Status Messages Appendix E Cable Connections RJ-45 Network PortsCross-Over Cabling Straight and crossover cable configurationStraight-Through Cabling RJ11 connector and cable To RJ-11 adapterContact Information Appendix F Registering your NetComm ProductLegal & Regulatory Information Customer Information Product Warranty Limitations of Warranty YML775 Rev1