NetComm NB600W manual Local Port, Start IP address, Number of IP address

3.1.2 Local Port

Configure your gateway’s Local Port IP address here. The Local Port must be a private IP ad- dress. (10.x.x.x, 192.x.x.x are reserved for LAN use).

Field	Description
Subnet Mask	The subnet mask determines the number of com-
	puters that are allowed in this network. A class C
	network with the subnet mask 255.255.255.0 allows
	maximum 253 users (the gateway is already using the
	192.168.1.1) in your local area network. Usually a
	class C network is satisfactory for a local network.
DHCP server	To enable the DHCP server, please click the check
	box. The DHCP server assigns dynamic IP address to
	the clients.
Start IP address	Specify the start of the IP address for DHCP users.
	The default value is 192.168.1.2. (Please make sure
	there is no fixed IP address within the range you as-
	signed here on the LAN, otherwise the DHCP client
	cannot get the IP address correctly.)
Number of IP address	Assign the number of users allowed to use the DHCP
	service. The default value is 128 users.

YML775 Rev1	NB600W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au	27