NetComm NB600W manual Port Range, Port Number

Page 48

Define Application - Options

Some applications need speciﬁed ports opened for Internet connection, such as games, Instant Messengers, etc.

Field	Description
Application	Type in the application name that is easy to remem-
	ber and identify.
Protocol	Select TCP or UDP. If you are not sure which one to
	use, check the application manual.
Port Range	Choose Single if there is one port to be opened, or
	choose Range for a range of port numbers.
Port Number	Type in the Port number or Port range.

Click Add to ﬁnish your setting and it will be added to the list.

NB600W Super-G Wireless Broadband Gateway User Guide	YML775 Rev1
48	www.netcomm.com.au

Image 48

Contents Page Legal & Regulatory Information Customer InformationImportant rules for safe operation NB600W Super-G Wireless Broadband Gateway User Guide Contents Introduction Product OverviewFeatures and benefits NetComm NB600W Super-G Wireless GatewayWhat’s in the package? Connecting the NetComm Super-G Wireless Gateway Connecting your GatewayConnect the Power Cable Connect the Ethernet CablesFactory Default Device1 NB600W Front Panel 2 NB600W Back Panel Log-in Default Values Management / Gateway AddressConfiguring your Computers OverviewConfiguring Windows 98 and Millennium PCs Page Configuring Windows 2000 PCs Page Configuring Windows XP PCs Page Configuring the Wireless Gateway Accessing the Configuration ManagerHttp//192.168.1.1 Basic Configuration Internet PortDhcp Configuration Host Name/Domain NameUse Static DNS MAC addressPPPoE Configuration Password &Confirm PasswordService Name Packet Size MTUField Static IP Configuration IP AddressGateway Primary DNSPptp Configuration Password & Confirm PasswordServer IP Default value is 1492 Bytes. If your ISP requires a Local Port Start IP addressNumber of IP address Lease Time Static Dhcp IP & MAC AddressWins Server Wireless LAN Hide SsidRegion ChannelEnable Wireless Access List Security ModeWPA Pre-Shared Key Ral Key Integrity Protocol. Tkip utilizes a stronger802.1x Radius Advanced Setup Access Control List Advanced ItemsUser Group ApplicationDefine Group Options Group NameEvery IP address This IP address IP Address Range Define Application Options Application nameProtocol Port Range/Port NumberAdvanced Setup Content filtering Block URLs By KeywordBlock URLs With IP Address Block Java AppletsBlock Cookies Block Download FileSchedule Trust UserAdvanced Setup Dynamic DNS Update Status Advanced Setup Firewall Email Alarm Options Return Address Mail logTime Advanced Setup Remote Management Password, Confirm PasswordWeb Management Port Allow Management from PC Send System Log to this PC Advanced Setup Static Routes Destination Network / HostAdvanced Setup UPnP Enable UPnPAdvanced Setup Virtual Server Server IP addressPort Range Port NumberManagement Access Log ManagementManagement Factory Reset NB600WManagement Firmware Upgrade Management Network Status RefreshConnect/Renew Disconnect/ReleaseUser List Session ListManagement Save Configuration Management Time Appendix a Technical Specifications Dimensions & Weight HardwareWireless Security Web Contents FilteringSoftware Networking /Transport layer protocolManagement What is a dynamic IP address? What is DMZ?What is Dynamic DNS? Why Dynamic DNS? What is Wildcard? Appendix B Frequent Asked QuestionsWhat’s MX Mail Exchanger? And why MX? What is PPPoE PPP Over Ethernet?What is MTU? Appendix C Troubleshooting Cannot access the InternetRefresh your IP address MS Windows IP address conflictAppendix D Ddns Update Status Messages Appendix E Cable Connections RJ-45 Network PortsStraight and crossover cable configuration Straight-Through CablingCross-Over Cabling RJ11 connector and cable To RJ-11 adapterAppendix F Registering your NetComm Product Legal & Regulatory InformationContact Information Customer Information Product Warranty Limitations of Warranty YML775 Rev1