NetComm NB600W manual Allow Management from PC, Send System Log to this PC

Page 44

Field

Description

Allow Management from PC	Check this box to restrict management access from
	the LAN. Only the PC with the MAC address you
	specify here can manage the gateway. If you key in
	the wrong MAC address and press “Save” by mis-
	take, your PC will lose access to the gateway. If this
	happens, you will need to press the reset button (on
	the rear side of the gateway) for 5 seconds to restore
	the gateway to its factory default values.
Send System Log to this PC	The gateway will send the system logs to the PC with
	the IP address speciﬁed here.

NB600W Super-G Wireless Broadband Gateway User Guide	YML775 Rev1
44	www.netcomm.com.au

Image 44

Contents Page Important rules for safe operation Legal & Regulatory InformationCustomer Information NB600W Super-G Wireless Broadband Gateway User Guide Contents Introduction Product OverviewFeatures and benefits NetComm NB600W Super-G Wireless GatewayWhat’s in the package? Connecting the NetComm Super-G Wireless Gateway Connecting your GatewayConnect the Power Cable Connect the Ethernet Cables1 NB600W Front Panel 2 NB600W Back Panel Factory DefaultDevice Log-in Default Values Management / Gateway AddressConfiguring your Computers OverviewConfiguring Windows 98 and Millennium PCs Page Configuring Windows 2000 PCs Page Configuring Windows XP PCs Page Http//192.168.1.1 Configuring the Wireless GatewayAccessing the Configuration Manager Basic Configuration Internet PortDhcp Configuration Host Name/Domain NameUse Static DNS MAC addressPPPoE Configuration Password &Confirm PasswordService Name Packet Size MTUField Static IP Configuration IP AddressGateway Primary DNSServer IP Pptp ConfigurationPassword & Confirm Password Default value is 1492 Bytes. If your ISP requires a Number of IP address Local PortStart IP address Wins Server Lease TimeStatic Dhcp IP & MAC Address Wireless LAN Hide SsidRegion ChannelEnable Wireless Access List Security ModeWPA Pre-Shared Key Ral Key Integrity Protocol. Tkip utilizes a stronger802.1x Radius Advanced Setup Access Control List Advanced ItemsUser Group ApplicationEvery IP address This IP address IP Address Range Define Group OptionsGroup Name Define Application Options Application nameProtocol Port Range/Port NumberAdvanced Setup Content filtering Block URLs By KeywordBlock URLs With IP Address Block Java AppletsBlock Cookies Block Download FileSchedule Trust UserAdvanced Setup Dynamic DNS Update Status Advanced Setup Firewall Email Alarm Options Time Return AddressMail log Web Management Port Advanced Setup Remote ManagementPassword, Confirm Password Allow Management from PC Send System Log to this PCAdvanced Setup Static Routes Destination Network / HostAdvanced Setup UPnP Enable UPnPAdvanced Setup Virtual Server Server IP addressPort Range Port NumberManagement Access Log ManagementManagement Factory Reset NB600WManagement Firmware Upgrade Management Network Status RefreshConnect/Renew Disconnect/ReleaseUser List Session ListManagement Save Configuration Management Time Appendix a Technical Specifications Dimensions & Weight HardwareWireless Security Web Contents FilteringSoftware Networking /Transport layer protocolManagement What is a dynamic IP address? What is DMZ?What is Dynamic DNS? Why Dynamic DNS? What is Wildcard? Appendix B Frequent Asked QuestionsWhat is MTU? What’s MX Mail Exchanger? And why MX?What is PPPoE PPP Over Ethernet? Appendix C Troubleshooting Cannot access the InternetRefresh your IP address MS Windows IP address conflictAppendix D Ddns Update Status Messages Appendix E Cable Connections RJ-45 Network PortsCross-Over Cabling Straight and crossover cable configurationStraight-Through Cabling RJ11 connector and cable To RJ-11 adapterContact Information Appendix F Registering your NetComm ProductLegal & Regulatory Information Customer Information Product Warranty Limitations of Warranty YML775 Rev1