Chapter 4. Web Management Interface
4.2AP
This section provides information on the following functions: Overview, General, VAP Configuration, Security, Advanced and Access Control. The NP725 supports up to eight WLANs by Virtual Access Point (VAP). Each VAP can have its own settings including ESSID, VLAN ID, security settings, and etc. Therefore, these VAPs can bring different service level to clients depending on the ESSID connected to. Please click on the menu item AP to configure VAPs.
4.2.1 Virtual AP Overview
The overall status is collected in this page, including enable/disable state, security type, MAC ACL state, and advanced settings. NP725 has 8 VAPs; each has its own setting. In the table, please click on the specific item to have detailed configuration of these VAPs respectively.
State: The hyperlink showing enable or disable connects to the screen of VAP Configuration.
25