Net Optics ISW-CU3-S4x16 Viewing iMatrix Switch Information, To view iMatrix Switch information

Page 33

4xN 10/100/1000 Span iMatrix Switch

2.For the parameter you wish to conﬁgure, click on the corresponding value ﬁeld.

3.Select an option from the drop-down list or enter a new value from your keyboard.

4.The new conﬁguration parameters take effect next time System Manager polls the iMatrix Switch.

The table below describes the conﬁguration options on the Conﬁgure Tab.

Host Name	The name of the iMatrix Switch

IP Address	The IP address of the iMatrix Switch.

Netmask	The IP address netmask.

Gateway IP Address	The IP address of the gateway.

System Manager IP	The IP address of the host PC running System Manager
Address	or third-party SNMP management tool.

Monitor Port 1	The speed setting for Monitor Port 1 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).

Monitor Port 2	The speed setting for Monitor Port 2 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).

Monitor Port 3	The speed setting for Monitor Port 3 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).

Monitor Port 4	The speed setting for Monitor Port 4 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).

Viewing iMatrix Switch Information

System Manager allows you to view the current iMatrix Switch conﬁguration information, including the Monitor Port connections.

To view iMatrix Switch information:

1.Click the image of the iMatrix Switch you want to view in the System Frame. A window similar to Figure 27 appears.

29

Image 33

Contents User Guide for 4xN 10/100/1000 Span iMatrix Switch Trademarks and Copyrights Contents Chapter Using System Manager Appendix B Command Line InterfaceAppendix a Speciﬁcations and Models Remote Control Scalable DeploymentReliability Passive, Secure Technology Key FeaturesEase of Use SupportAbout this Guide Unpacking and InspectionLED Indicators Product DiagramsSingle iMatrix Switch Mode Installation PlanningDaisy Chaining Mode Remote AccessConﬁguring the iMatrix Switch Using the Command Line Interface CLITo access the iMatrix Switch CLI Set username username To change the username and passwordTo set the iMatrix Switch IP address Set password passwordTo display current settings To disable the remote interfacesIMatrix Switch CLI Help Menu To use the Help commandConnecting to Switch Span Ports Connecting to the Monitoring Device3 4 5 6 7 Connecting Monitor Ports Connecting the Remote Interface PortTo daisy chain iMatrix Switches Daisy Chaining iMatrix SwitchesConnecting Daisy Chained Monitor Ports Connecting the Daisy Chain Control Ports To access Web Manager Accessing Web ManagerField Name Value Description Viewing Switch StatusField Name Function/Value Description Switch ControlMessage Board To install System Manger Installing System ManagerWelcome Dialog Box Conﬁrm Installation Installation Progress Exploring System Manager To access System ManagerTo create an iMatrix Switch group Using the ToolbarCreating a Group TipAdding iMatrix Switches Deleting a GroupTo delete a Group Adding a New iMatrix Switch To add an iMatrix Switch to the systemNet Optics System Manager with an iMatrix Switch Conﬁguring an iMatrix Switch Deleting an iMatrix SwitchTo delete an iMatrix Switch from System Manager To conﬁgure the iMatrix SwitchTo view iMatrix Switch information Viewing iMatrix Switch InformationFollowing table explains the status ﬁelds To modify the iMatrix Switch conﬁguration Modifying an iMatrix SwitchTo connect a Monitor Port to a Span Port Controlling Switch ConnectionsConnecting Monitor Port To enter Span Port Names and Notes Entering Port Names and NotesElectrical EnvironmentalMechanical Software Command Line InterfaceIMatrix Web Manager IMatrix System ManagerAppendix B Command Line Interface 4xN 10/100/1000 Span iMatrix Switch 4xN 10/100/1000 Span iMatrix Switch By Net Optics, Inc. All Rights Reserved