Minicom Advanced Systems DX User IP manual Snmp Settings, Anti Brute Force Settings

Page 46

DX USER IP

0.0.0.0/0 matches any IP packet.

Policy - Determines what to do with matching packets. They are accepted or dropped.

NOTE: The order of the rules is important. The rules are checked in ascending order until a rule matches. Rules below the matching one are ignored. The default policy applies if no match has been found.

Append a rule – To add a rule to the end of the rule list: Enter the IP/Mask and set

the policy. Then press .

Insert a rule - To insert a rule according to the rule number: Enter the rule number,

IP/Mask and set the policy. Then press . All rules with higher numbers are shifted below.

Replace a rule - Enter the rule number, IP/Mask and set the policy. Then press .

Delete a rule - Enter the rule number and press .

Anti Brute Force Settings

Anti Brute Force Settings lets you block access to a specific user, for a fixed amount of time if a predefined number of unsuccessful login attempts by this user occurred.

Max. number of failed logins – insert a maximum number or leave it blank to disable Anti Brute Force.

Block time - Block time in minutes - insert a number or leave it blank.

To unblock blocked users. Connect to the DX User IP Serial 1 port using terminal software, and type unblock. A list of blocked users appears. Select the users to unblock.

37.SNMP Settings

The following information is available via SNMP:

∙Serial number

∙Firmware version

∙MAC address / IP address / Netmask / Gateway of LAN interface

∙Configured users

∙Currently active users with login time (login time is only valid if time is synchronized on DX User IP)

45

Image 46

Contents DX User IP User Guide Table of Contents User Guide Welcome Technical precautionsTrademarks Introduction LAN / WANDX User IP components Features of DX User IPCables DX User IP rear panel Reset buttonsDX User IP front panel Serial portMouse synchronization limitations Pre-installation guidelinesRack mounting the DX User IP Terminal portMotion tab Disable Active Desktop Connecting the DX User IP to the Wan/LANDX User IP connections Local User Connecting an RS232 terminalMbps connection Configuration via Dhcp server Order of powering onConfiguring the system Configuration via local consoleConnect To box Hyperterminal DX User IP system interface Via the IP Device Setup utilityVia Ethernet Crossover connection Login screen LoggingRemote Console Settings TimeoutWork area Remote Console Settings Transmission EncodingVarious Remote Console Options Remote Console TypeTelnet server commands Access via TelnetTelnet Console Event Log via Ipmi Power ControlStatus via Ipmi File transfer Virtual FloppyInternal power Internal Power ControlKeyboard & Mouse Settings External powerAuto Mouse speed Fixed Mouse speedKVM Settings Mouse settingsNumber of Ports Default configurationActive Port Duration of PauseKVM Port Settings KVM Port SettingsAppending a socket Inserting a socketChanging the order Video SettingsEnable local video port Noise filterCustom Video Modes Custom Video Modes windowUser/Group Management Existing userFull user name Password / Confirm passwordNew user name Email address /Mobile numberGroup Management Modify User buttonCopy User Create group buttonUser/Group Permissions Copy GroupNetwork Settings Network SettingsSubnet mask IP auto configurationIP address Gateway IP addressDynamic DNS Dynamic DNS Settings Serial Port Settings Serial PortDX User IP External Power Option External Power Option for Serial portSecurity Settings Serial Port 2 external power option SSL settings SSL Certificate ManagementCSR Telnet Settings IP Access ControlSnmp Settings Anti Brute Force SettingsYou can change the following parameters Ipmi Settings DX User IP Snmp MIBIpmi Settings Ldap Settings Ldap SettingsMaintenance Updating firmwareMaintenance Features Direct SmartIP LinksIcons are color coded as follows Icon MeaningAccess the Datafile for support Include/modify custom Html codeKeyboard layout Accessing the remote consoleGo to the DX Operating Guide Control buttons /toolbar icons User Guide Chat window Chat windowVideo Settings access Mouse synchronizationSingle mouse mode Choose Options / Mouse Handling / Intelligent SyncFrequently Asked Questions Glossary of terms Appendix a DX User IP Video modes Appendix B Key codes Key RJ 45 Connector Ethernet Appendix C Pin assignmentsSerial SUB-D 9 Connector NetWare 6 servers running Java Windows 98 and Windows MEWindows 98 SE and Windows NT4 NetWare 6 servers running Java 1.3.1 CSP8 or CSP9Linux Appendix E Technical specifications User Guide Feedback Regional Offices