Multi-Tech Systems MultiConnect Adapter Setting Country or Region Codes Using the CLI, To code

Chapter 5 – Setting Country or Region Codes Using the CLI

Chapter 5 – Setting Country or

Region Codes Using the CLI

The Default Country or Region Code is B5.

If You Want to Change the Country or Region Code, Use the Command Line Interface:

Command Syntax	set serial s1 modem country-code value <value>
Description	Sets the modem country/region code value to <value>.
	This command is valid only for port s1. Applicable only if the country-code type is set
	to code.
Default Value	-
Success	OK
Error	1. Too few arguments
	“Usage: set serial s1 modem country-code value <value>
	Type ‘set serial s1 modem country-code value ?’ for more information”
	Note: There is no validation on the country/region code value.

To View Country or Region Code:

Command Syntax	show serial modem country code
	This command is supported on s1 only.
Description	Displays the supported country/region codes for this product.
Default Value	-
Success	OK
Error	1. Too few arguments
	Possible value(s) are
	configuration
	chat-script
	country/region code
	modem-configuration
	statistics

Country or Region Codes – A list of thcountry or region code settings for the countries/regions that Multi- Tech currently supports is available on the Multi-Tech Web site at:

http://www.multitech.com/PRODUCTS/Categories/External_Device_Networking/global_modems/configuration.asp #chart

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354B) 13