CDC UPD
AUX
To adjust the seek tuning sensitivity for local recep- tion.
LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately set for AM and FM.
Use this function to delete CD names during CDC op- eration, in order to have more storage capacity for new discs available. See “Deleting CD names with
This menu item is not avail- able if you have connected a CD changer (A 05 or A071).
The setting made at the fac- tory is AUX OFF.
If you have connected an external piece of equipment via AUX, this function must be set to AUX ON.
VOL FIX Use this function to select the volume at which the ra- dio is set when it is switched on. Adjust the desired vol- ume level with c< >>. When adjusted to “VOLO”, the system will come on with the volume selected before switching the radio off.
To quit the DSC programming mode and store the adjustment:
•Press DSC.
Overview of the DSC factory settings
CD NAME |
|
LOUDNESS | 3 |
TA VOL | 35 |
SPEECH | 0 |
BEEP | 4 |
ANGLE | 0 |
BRIGHT | 16 |
COLOUR | green |
LED | ON |
LEARN KC |
|
READ KC |
|
SCANTIME | 10 sec. |
S - D X | 1 |
S - L O | 1 |
CD UPD |
|
AUX | OFF |
VOL FIX | 0 |
-
Appendix
Spdfications
Amplifier
Output power:
25
4 x 23 W RMS power act. to DIN 45324 at 14.4 V
4 x 35 W max. power
Tuner
Wavebands: |
| |
FM | : | 87.5 - 107.9 MHz |
AM | : | 530- 1710 kHz |
FM | sensitivity: | 0.9 uV at 26 dB signal- |
|
|
FM frequency response:
Tape player Frequency response:
Questions? Problems?
Call 1-800-288-2528
Subject to modifications!
26