Audio Features:
35 x 4 Watts Peak Internal Power
Resistance
Switchable Auxiliary Input
Quick reference
@Switching on/off at a ON button:
Press ON.
When switching the set on with the ON button, the KeyCard has to be insert- ed. The unit will play with the pre- adjusted volume.
After the ignition has been switched off, a double beep tone will remind you that you should
before leaving your vehicle.
Switching on with the ignition being
switched off: | I |
|
Cassette Features:
Super CPS Program Search
Tape Scan & Blank Skip
Dolby B Noise Reduction
AutoMetal Tape Equalization
DMS CD Changer Control Fea- tures:
Controls Blaupunkt
Disc Naming
Track Scan
MIX CD
MIX MAG
Other Features:
DIN Chassis, Bracket & Hardware
Dimensions 179 x 50 x 150 mm
Designed, Engineered and Manufactured by Blaupunkt in Germany
Switching on/off with the KeyCard: ’
Turn the unit ON.
Make the orange tongue stick out by pressing it into the radio so that it pops out. Insert the KeyCard into the slot with the gold contact facing up and the arrow pointed into the unit.
Note:
Read the information in chapter “Key- Card theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the set can also be turned on and off via the vehicle ignition.
To keep on operating the set when the ignition is switched off (KeyCard is in- serted), proceed as follows:
Press ON after the double beep tone. The unit will be
@VOL+ / VOL-
To alter the volume.
Each time the set is switched on, it will play with the
You may also change the VOL FIX set- ting (see chapter “DSC programming”).
For instantly muting the volume.
By pressing the r$j button the volume will be muted immediately. “MUTE” will appear in the display.
The function is cancelled by pressing button r#j or VOL+.
5
When pressing
To program the mute volume level, proceed as follows:
•Adjust the desired volume.
•Press r%j for two seconds until you hear a beep.
Now this volume level is stored as your mute volume.
Extra function #
Memory storing button in the DSC menu.
Press repeatedly to switch between the FM memory banks I, II and T (Travelstore).
When pressing this button, the system will automatically switch to FM.
Extra function FM1
To store the six most powerful stations automatically with Travelstore:
Press FMT until you hear a beep or
05 AMT
AM switch
Extra function AMT
To store the six most powerful stations automatically with Travelstore:
Press AMT until you hear a beep or
@ Rocker switch
Station search (seek tuning)
UP
Down
Up/Down in short intervals when AF is off (manual tuning)
When AF is on, press
TaDe Operation
A I v Track selection
>>Fast forward << Fast rewind
Stop function by pressing AV.