Multi-Tech Systems MVP110 quick start Configuring Your Host MultiVOIP, Configure Host MultiVOIP

Configure Host MultiVOIP

Configuring Your Host MultiVOIP

Configuring your Host MultiVOIP involves software loading and configuration.

The software loading procedure does not provide every screen or option in the loading process. It is assumed that a technical person with a thorough knowledge of Windows and the software loading process is performing the installation. Additional information on the MultiVOIP software is provided in the User Guide supplied with your MultiVOIP.

If you are installing a MultiVOIP behind a firewall, you need to add the following UDP ports to your firewall.

900 Signaling Information	5004 RTP Packets
5000 Status Information	5005 RTCP Packets

Refer to your firewall user documentation to enter and open these ports.

1.Make certain that your MVP 110 has been properly cabled and that the power is turned on.

2.Insert the MVP 110 CD into your CD-ROM drive. The CD should start automatically. It may take 10 to 20 seconds for the Multi-Tech CD installation window to display.

11