MultiVOIP Quick Start Guide
Configuring Your ClientMultiVOIPs
If you are installing a MultiVOIP behind a firewall, you need to add the following UDP ports to your firewall.
900 Signaling Information | 5004 RTP Packets |
5000 Status Information | 5005 RTCP Packets |
Refer to your firewall user documentation to enter and open these ports.
1.Disconnect the PC from the command port of the Host MultiVOIP and connect it to the command port on the Client MultiVOIP.
2.Win 3.1 users - from the Program Manager,
Win95/98/NT/2000 users - from your desktop, click Start Programs I MultiVOIP I Upgrade Software. The following dialog box displays.
3.Click Yes. The IP Protocol Default Setup dialog box displays.
The default Frame Type is TYPE_II. If this does not
24