Configure Client MultiVOIPs
match your IP network, select the Frame Type from the Frame Type list. The Frame Type choices are TYPE_II and SNAP.
4.In the Port Address group, enter the IP Address and IP Mask. In the Gateway Address group, enter the gateway IP address for the client unit.
The IP address is your unique LAN IP address, and the Gateway address is the IP address of the device connected to the Internet/Intranet.
Click OK when you are finished. The Channel Setup dialog box displays.
5.The Channel Setup dialog box defines the voice coder, fax parameters, and regional telephone parameters for the voice/fax channel.
6.If you are connecting a station device such as an analog telephone, a fax machine, or a Key Telephone System (KTS) to the Voice/Fax connector on the back of the unit.
25