AMX NXR-ZGW/-ZRP manual Device Configuration

Table of Contents
Network	19
Enabling and disabling the wireless network	19
Connecting an NXR-ZRP to the network for the first time	19
Setting the PAN channel	20
Connecting a Repeater to the Gateway	20
Connections	21
Finding a device’s EUI address	21
Finding the device’s description	21
Determining the device type	21
Finding the amount of time a signal takes from the device to the gateway and back ..	22
Determining the device link quality	22
Checking the device link status	22
PAN Device Details	23
Putting a device on the Access List	24
Removing a device from the Access List	24
Locating the device	24
Changing a Connected Device description	24
Changing a device’s ZigBee networking information	25
Utilities	26
Device Firmware	26
Allowing firmware updates to individual devices	26
Allowing firmware updates to all devices on a network	26
Connection Log	27
Determining the connection status of a device	27
Finding the device’s ICSP number	27
Traffic Log	28
Finding the device traffic	29
Device Configuration	31
Sending Firmware to The NXR-ZGW	31
Before beginning the Upgrade process	31
Upgrading The NXR-ZGW via An IP Address	31
Preparing the Master for communication via an IP	31
Verifying and Upgrading the device firmware via an IP	32
Using the ID Button to Change the NXR-ZGW’s Device Number	34

ii NXR-ZGW/-ZRP