AMX NXR-ZGW/-ZRP manual NXA-WAP 2403A 3 dBI Antenna FG2255-20

Overview

NXR-ZGW (FG5791-01) Specifications (Cont.)

Rear Components:
Power connector	Two power options are available:
	• 2-pin 3.5mm Phoenix connector
	• Power Over Ethernet (PoE) - powers the device through the CAT5 cable.
	Both Power and Data can be transmitted simultaneous through the CAT5
	cable when using the appropriate equipment.
Ethernet port	10BaseT modular (RJ-45) connector - used to connect the NXR-ZGW to
	your LAN and/or to connect your third party device to the LAN when the NXR-
	ZGW is used as a gateway.
Certifications:	• FCC ID: CWU-ZGW
	• IC ID: 5078A-ZGW
	• CE
	• IEC-60950
	• TELEC
Operating/Storage	• Operating Temperature: -30°C (-22°F) to 70°C (158°F)
Environments:	• Relative Humidity: 5% to 85% non-condensing; intended for indoor use only
Included Accessories:	• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)
	• Rubber feet
	• Velcro mounting strip
	• Power Supply (24-5791-SA)
Other AMX Products:	• Mio Modero R-3 Remote (FG148-03)
	• Mio Modero R-4 Remote (FG148-04)
	• NXR-ZRP NetLinx ZigBee Repeater (FG5791-02)
	• NXA-WAP 2403A 3 dBI Antenna (FG2255-20)
	• NXA-WAP 2405A 5.5 dBI Antenna (FG2255-21)
	• NXA-WAP 2413A Mounting Bracket (FG2255-24)

Connection LEDs

			ID Button
	PWR/STATUS
	LAN
	RF
	ANT	ID
	(Front)		Antenna Mount
10BaseT Modular	ETHERNET
(RJ-45) connector		12VDC	2-pin 3.5mm Phoenix
			power connector

PoEPWR

(Rear)

FIG. 1 Front and Rear Components of the NXR-ZGW

2 NXR-ZGW/-ZRP