Multi-Tech Systems MT9234ZBA-V manual Configure the Modem for Your Country or Region

Page 11

Chapter 2 – Installation

Step 4: Configure the Modem for Your Country or Region

Different countries have different requirements for how modems must function. Therefore, before you use your modem, you must configure it to match the defaults of the country/region in which you are using it. You must also do this if you move the modem to another country/region after it has been configured for the first country/region. You can use one of two configuration methods:

1.Use the Global Wizard to Configure Your Modem

2.Use AT Commands to Configure Your Modem

Using the Global Wizard to Configure Your Modem

The Global Wizard configuration utility is recommended for computers running Windows 2000 or newer.

1.Insert the MultiModem ZBA product CD into the CD-ROM drive. The Autorun menu should appear.

2.Click Initial Setup and Country/Region Selection.

3.Choose either:

a.Run Global Wizard from CD. This will not load the wizard onto your hard drive, or

b.Install Global Wizard on the HD. This will install the wizard onto your hard drive for future use.

4.The Global Wizard dialog box appeared. Click Next.

5.The Global Wizard searches for your modem and identifies it. Click Next.

6.Select the country/region in which the modem will be used. Click Next.

7.Review your country/region choice. If it is correct, click Next to configure the modem.

8.When Global Wizard announces that the parameters have been set, click Finish to exit.

Using AT Commands to Configure Your Modem

Non-Windows users can configure the modem using AT commands. You must enter these commands in your communication program’s terminal window.

1.Run your favorite communication program and open the program’s terminal window.

2.To configure the modem for a specific country/region:

Type AT%T19,0,nn, where nn is the country/region code in hexadecimal notation.

Click ENTER. The message OK displays.

3.To verify that the correct country/region has been configured, type: ATI9 and click ENTER.

The country/region code displays:

Example:

Country/Region

AT Command (hexadecimal)

Country code (decimal)

 

Euro/NAM

AT%T19,0,34 (default)

52

A list of country/region codes can be found on the Multi-Tech Web site at:

http://www.multitech.com/en_US/PRODUCTS/Categories/Device_Networking/global_modems/configuration.asp

The Global Modem Country Approvals page displays. On this page you can view approvals, configuration strings and responses by country and products.

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387C)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
MultiModem ZBA World Headquarters PN S000387C, Version C CopyrightTrademarks PatentsContents Introduction FeaturesAT Commands Info CE Mark Technical SpecificationsOpening the Modem InstallationSafety Warnings Change the Internal Jumpers Changing the Voice Jumper Connect the Modem to Your PC Windows Installer Connect the Modem to the AC Power OutletPower-On Test Install the Modem DriverPage Click Initial Setup and Country/Region Selection Configure the Modem for Your Country or RegionUsing the Global Wizard to Configure Your Modem Using AT Commands to Configure Your ModemAbout the Front Panel SetupConnecting to the Internet OperationChanging the Remote Escape Character Remote ConfigurationChanging the Setup Password Turning Callback Security On and Off Changing the Setup PasswordCallback Security Assigning Callback Passwords and Phone Numbers Setting Callback Security Message ParityNumber-Entry Callback Calling ProceduresPassword-Only Callback Direct Connection Extension-Entry CallbackCallback Assignments Form Callback Security CommandsModem Does Not Respond to Commands TroubleshootingNone of the Indicators Light Modem Cannot Connect When Dialing Page Fax and Data Software Can’t Run at the Same Time Data Is Being LostThere Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller IDIdentify the Current Firmware Version Download the Upgrade FileAppendix a Upgrading the Modem’s Firmware Identify the Modem FirmwareClear Your Stored Parameters Extract the Upgrade FilesUpgrade the Modem’s Firmware Restore Your ParametersFCC Part 68 Telecom Appendix B Regulatory ComplianceFCC Part 15 Regulation Thailand Approval EMC, Safety and R&TTE Directive ComplianceCanadian Limitations Notice Industry CanadaJapan Requirements New Zealand Telecom Warning NoticeSouth African Statement Special phone cable is required for regulatory compliance Brazil Special Cable for MT9234ZBA model onlyReach Statement Appendix C Environmental InformationWeee Waste Electrical and Electronic Equipment Statement Appendix C Environmental Info CR6+ Rohs HT/TS Substance ConcentrationAppendix D Installing a Modem under Linux Configure for Callback Security in Direct Connect Mode Appendix E Connecting to a Cisco RouterConfigure the Modem for your Country or Region Console Port Connections Console Port Final SetupRemote Configuration Index AT commands
Related manuals
Manual 38 pages 57.14 Kb Manual 35 pages 61.01 Kb
Top Page Image Contents