Multi-Tech Systems MT9234ZPX-UPCI-NV FCC Part 15 Class B Statement, Canadian Limitations Notice

Page 53

Appendix B – Regulatory Compliance

FCC Part 15 Class B Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 47 CFR – FCC Part 15 regulations. The stated limits in this regulation are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with 47 CFR – FCC Part 15 rules. Operation of this device is subject to the following conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canadian Limitations Notice

Notice: The ringer equivalence number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the ringer equivalence numbers of all the devices does not exceed 5.

Notice: The Industry Canada label identifies certificated equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Industry Canada label does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel brouilleur.

Protection Against Contact with TNV Circuit

The protective cover is fastened to the modem card by means that will only allow a tool to remove the cover. Warning: Removal of the protective cover will affect product safety and user safety requirements.

Multi-Tech Systems, Inc. MT9234ZPX User Guide

53

Image 53
Contents User Guide Warranty Knowledge Base and Support Services World HeadquartersRevision History Date Description TrademarksContents AT Command Info Description and SpecificationsFeatures Package ContentsCategory Technical SpecificationsWindows Installer InstallationGeneral Safety Page Physically Installing your MultiModem Line Connection Make the External ConnectionsPhone Connection Optional Microphone/Headphone Connection OptionalManually Installing Drivers Card Driver Installation Driver Installation for WindowsAt the Browse for driver software on your computer screen Select Browse my computer for driver softwarePage Windows 7 Port Installation Page Page Installation of the COM port Page Installation of the modem Completion Preliminaries Driver Installation of your PCI Serial PortInstallation Installation Installation of the Communications Port At the Browse for driver software on your computer screen Installation of the Modem Click Install Multi-Tech Systems, Inc. MT9234ZPX User Guide Page Welcome to the Found New Hardware Wizard screen appears Installation of the Serial PortInstallation Click Continue Anyway Multi-Tech Systems, Inc. MT9234ZPX User Guide Installation of the Communications Port Multi-Tech Systems, Inc. MT9234ZPX User Guide Click Continue Anyway Installation Installation of the Modem Multi-Tech Systems, Inc. MT9234ZPX User Guide Click Continue Anyway Installation Page Using AT Commands to Configure Your Modem Configure the Modem for Your CountryUsing the Global Wizard to Configure Your Modem Basic Procedure Remote ConfigurationSetup To Change the Setup PasswordModem Does Not Respond to Commands TroubleshootingModem Cannot Connect When Dialing File Transfer Is Slower Than It Should Be Modem Cannot Connect When AnsweringModem Disconnects While Online There Are Garbage Characters on the Monitor Data Is Being LostModem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same TimeSpeakerphone Test with voice option Click Cancel in the Connection Description dialog boxLoopback Test Reach Statement Appendix a Environmental InformationWaste Electrical and Electronic Equipment Weee Statement Restriction of the Use of Hazardous Substances RoHS ­RoHS HT/TS Substance Concentration 依照中国标准的有毒有害物质信息FCC Part 68 Telecom Appendix B Regulatory ComplianceCanadian Limitations Notice FCC Part 15 Class B StatementIndustry Canada Protection Against Contact with TNV CircuitNew Zealand Telecom Warning Notice EMC, Safety, and R&TTE Directive ComplianceThailand Approval South African NoticeJapan Requirements International Modem RestrictionsAppendix C Upgrading Your Modem Upgrade OverviewIntroduction Identify the Modem FirmwareExtract the Upgrade Files Download the Upgrade FileUpgrade the Modem’s Firmware Restore Your ParametersAppendix D Installing in Linux Configuration Configuration Index

MT9234ZPX-UPCI-NV specifications

The Multi-Tech Systems MT9234ZPX-UPCI-NV is a versatile modem designed for robust data communication in various applications. Known for its reliability, the MT9234ZPX-UPCI-NV is particularly beneficial in industries where continuous and efficient connectivity is essential, such as telecommunications, banking, and remote monitoring.

One of the standout features of the MT9234ZPX-UPCI-NV is its ability to support multiple data protocols, including V.32, V.34, V.90, and V.92 standards. This range of compatibility ensures that users can connect to various networks seamlessly, whether the connection is analog or digital. The modem is engineered for high-speed data transmission, providing rates of up to 56 Kbps, allowing businesses to handle larger volumes of data efficiently.

The MT9234ZPX-UPCI-NV integrates a PCI interface, making it easy to install in personal computers or servers. This design is particularly advantageous for users seeking to enhance their existing systems without requiring additional external devices. The modem is compact and designed to occupy minimal space within a system architecture, which is crucial in environments with limited physical resources.

Another significant technology utilized in the MT9234ZPX-UPCI-NV is its adaptive technology, which automatically selects the best mode of operation based on the connection quality. This feature enhances overall performance and reliability, particularly in unstable network environments. Furthermore, the modem is equipped with robust error correction protocols, such as V.42 bis and MNP2-4, ensuring data integrity during transmission.

Power efficiency is also a hallmark of the MT9234ZPX-UPCI-NV, making it an environmentally friendly choice for businesses. Its energy-efficient design reduces operational costs while maintaining performance standards.

The modem supports advanced features such as Caller ID, call waiting, and fax capabilities, making it suitable for a variety of applications beyond data communication. Businesses can use this modem for fax transmission, making it a versatile tool for offices that require multifunctional capabilities.

In summary, the Multi-Tech Systems MT9234ZPX-UPCI-NV is an essential modem for businesses in need of reliable, high-speed data communication. With its comprehensive features, advanced technologies, and multiple protocols, it stands out in the competitive market of data communication devices. Whether for banking, telecommunication, or remote access applications, this modem delivers performance, versatility, and efficiency.