WPA Authentication | There are two items, “Enterprise |
Mode | and “Personal |
| the mode by clicking the item. |
WPA Cipher Suite | Select the WPA Cipher Suite to be TKIP or AES |
|
|
WPA2 Cipher Suite | Select the WPA2 Cipher Suite to be TKIP or AES |
|
|
To define the format, select what you need in the | |
| drop list. |
Enter the | |
| shared key format you selected. |
Enable Pre- | Mark this checkbox to enable |
Authentication | after selecting Enterprise (RADIUS) WPA 2 |
| authentication mode |
Authentication RADIUS | If you use RADIUS Sever to ensure your security, |
Sever | you have to set up the parameters in this item. To |
| set up the Port, IP address and Password of your |
| RADIUS, enter the Port Number, IP and |
| Password. |
Click <Apply Change> at the bottom of the screen to save the above configurations. You can now configure other advanced settings or start using the router.
Access Control Setting
To restrict the number of access authentication of stations, set up the control list in this page.
Configuration
Wireless Access Control Mode
Click on the drop list to choose the access control mode. You may select “Allow listed” to allow those allowed MAC addresses or select “Deny Listed” to ban those MAC addresses from accessing to this
- 16 -