Common configurations for WAN interface
Some settings can be configured with each WAN access types:
Enable Web Server To enable the user to access this Router through Access on WAN from Internet, enter the specific IP and the port number port
Enable IPsec pass Mark the check box to enable IPsec pass through on
through on VPN VPN connection; clear the checkbox to disable. connection
Enable PPTP pass Mark the check box to enable PPTP pass through on
through on VPN VPN connection; clear the checkbox to disable. connection
Enable L2TP pass Mark the check box to enable L2TP pass through on
through on VPN VPN connection; clear the checkbox to disable. connection
Clone MAC Address When ISP use MAC address authentication (with DHCP), then the MAC address of the Ethernet card attached to your Cable modem must be registered with the ISP before connecting to the WAN (Internet). If the Ethernet card has changed, the new MAC address must be registered with the ISP. MAC cloning feature allows the MAC address reported by WAN side network interface card to be set to the MAC address already registered with the ISP, eliminating the need to register the new MAC address with the ISP. This feature does not change the actual MAC address on the NIC, but instead changes the MAC address reported by Wireless Router to client requests. To Change the MAC address, enter it in the text box.
- 22 -