IP Filtering
The Wireless Router could filter the outgoing packets for security or management consideration. You can set up the filter against the IP addresses to block specific internal users from accessing the Internet.
Configuration
STEPS
1.Click the check box of “Enable IP Filtering” to enable the function.
2.Enter the specific Local IP address (EX 10.10.3.9), Protocol (UDP/TCP), and comment (EX. Peter)
3.To delete the IP address on the list, click the check box in the select item, and click the “Delete Selected”. If you want to delete all entries on the list, click “Delete All” to remove all of them.
Click <Apply Change> at the bottom of the screen to save the above configurations. You can now configure other advanced settings or start using the router.
- 24 -