MicroNet Technology SP915G user manual Virtual Server setting Æ Virtual Server

Page 31

Virtual Server setting Æ Virtual Server

You can define 10 groups Virtual Server here.

e.g. If you build a Server at local PC(client) and Wireless-G Outdoor AP/Bridge is connect to internet have a real IP. Check Enable the rule in Virtual Server and type Description, then key-in local PC’s IP in Local IP fields and port(use by the Server) in Local Port and select protocol (use by the Server). After finish those setting click Submit-> Reset-> Restart restart system to make settings work. The Server build at local PC will work in internet.

31

Image 31

Contents User’s Manual Wireless LAN Outdoor Bridge Model No. SP915G Table of Contents Bridge and Bridge Hardware Setup Package ContentsPower Over Ethernet PSE BOX for Power Over Ethernet POEIntroduction Minimum System RequirementsAP Mode Features and BenefitsFour Operational Modes Point to Point Mode Repeater ModePoint to Multi Point Mode Using the Configuration MenuPage Page Device IP Setting Æ Ethernet AP Setting -- Wireless0 or Wireless1 Page Encryption Set Encryption to Open System Set Encryption to Open System/Shared Key Point to Point Mode Setting Æ Wireless0 or Wireless1 Point to Multi Point Mode Setting Æ Wireless0 or Wireless1 Page Repeater Mode Setting Æ Wireless0 or Wireless1 AP and Bridge Dual Radio Setting For Simultaneous OperationDhcp Server Setting Æ Dhcp Page WAN Setting Æ WAN WAN Status Æ WAN Status Admin setting Æ Admin Page Firewall setting Æ Firewall Page Virtual Server setting Æ Virtual Server Connection Status Firmware upgrade Æ Upgrade Reset System Æ Reset Frequency Band Specifications