MicroNet Technology SP915G user manual Package Contents, Hardware Setup

Page 4

Package Contents

Before installing the product, please verify the following items in the package

zWireless LAN Outdoor Bridge

zQuick installation guide

zManual CD

zRF cable

zEthernet cable

zConsole cable

zPower-over-Ethernet injector

zAC Power cable

zAccessories

Note: Using a power supply with a different voltage than the one included with the Outdoor Bridge will cause damage and void the warranty for this product.

Hardware Setup

Ethernet & RS-232 Console Connector:

1.Console Port --- It is used for initial setup and configuration of the device

2.LAN Port --- It is used for connecting the enclosed PSE for Power Over Ethernet

3.WAN Port --- It used for connecting to ADSL for ISP

4

Image 4
Contents User’s Manual Wireless LAN Outdoor Bridge Model No. SP915G Table of Contents Bridge and Bridge Package Contents Hardware SetupPSE BOX for Power Over Ethernet POE Power Over EthernetMinimum System Requirements IntroductionAP Mode Features and BenefitsFour Operational Modes Repeater Mode Point to Point ModeUsing the Configuration Menu Point to Multi Point ModePage Page Device IP Setting Æ Ethernet AP Setting -- Wireless0 or Wireless1 Page Encryption Set Encryption to Open System Set Encryption to Open System/Shared Key Point to Point Mode Setting Æ Wireless0 or Wireless1 Point to Multi Point Mode Setting Æ Wireless0 or Wireless1 Page Repeater Mode Setting Æ Wireless0 or Wireless1 Dual Radio Setting For Simultaneous Operation AP and BridgeDhcp Server Setting Æ Dhcp Page WAN Setting Æ WAN WAN Status Æ WAN Status Admin setting Æ Admin Page Firewall setting Æ Firewall Page Virtual Server setting Æ Virtual Server Connection Status Firmware upgrade Æ Upgrade Reset System Æ Reset Specifications Frequency Band