MicroNet Technology SP915G user manual

Page 20

00.01.02.03.04.08and P2P-2 Wireless1 Mac: 00.01.02.03.04.0A in WDS

macs fields.

Then set WEP encryption, and disable WPA encryption. Pull down select “y” in hidden SSID to disable SSID broadcast.

Set P2P-1 Wireless1 in AP/Bridege Mode, and type PMP Wireless1 Mac:

00.01.02.03.04.06in WDS macs fields. Then set channel the same as PMP Wireless1.Set WEP encryption the same as PMP Wireless1.Dsiable P2P-1 Wireless1

WPA encryption. Pull down select “y” in hidden SSID to disable SSID broadcast.

Set P2P-2 Wireless1 in AP/Bridege Mode, and type PMP Wireless1 Mac:

00.01.02.03.04.06in WDS macs fields. Then set channel the same as PMP Wireless1.Set WEP encryption the same as PMP Wireless1.Dsiable P2P-2 Wireless1 WPA encryption. Pull down select “y” in hidden SSID to disable SSID broadcast.

20

Image 20

Contents User’s Manual Wireless LAN Outdoor Bridge Model No. SP915G Table of Contents Bridge and Bridge Package Contents Hardware SetupPSE BOX for Power Over Ethernet POE Power Over EthernetMinimum System Requirements IntroductionFour Operational Modes Features and BenefitsAP Mode Repeater Mode Point to Point ModeUsing the Configuration Menu Point to Multi Point ModePage Page Device IP Setting Æ Ethernet AP Setting -- Wireless0 or Wireless1 Page Encryption Set Encryption to Open System Set Encryption to Open System/Shared Key Point to Point Mode Setting Æ Wireless0 or Wireless1 Point to Multi Point Mode Setting Æ Wireless0 or Wireless1 Page Repeater Mode Setting Æ Wireless0 or Wireless1 Dual Radio Setting For Simultaneous Operation AP and BridgeDhcp Server Setting Æ Dhcp Page WAN Setting Æ WAN WAN Status Æ WAN Status Admin setting Æ Admin Page Firewall setting Æ Firewall Page Virtual Server setting Æ Virtual Server Connection Status Firmware upgrade Æ Upgrade Reset System Æ Reset Specifications Frequency Band