MicroNet Technology SP915G user manual Firmware upgrade Æ Upgrade

Page 33

Firmware upgrade Æ Upgrade

Step 1 : Set your PC IP (192.168.2.X), and close PC’s firewall.

Step 2 : Open a TFTP server on your PC and put the firmware in the same direct.

Step 3 : Click on the Upgrade tab and then the main screen enter the PC IP address in the “tftp server :”field section 192.168.2.X , and the second option “file name” please key in the firmware file name. Then click Download and reset. It may take up to 2 minutes for the upgrade to complete.

Image 33

Contents User’s Manual Wireless LAN Outdoor Bridge Model No. SP915G Table of Contents Bridge and Bridge Hardware Setup Package ContentsPower Over Ethernet PSE BOX for Power Over Ethernet POEIntroduction Minimum System RequirementsFeatures and Benefits AP ModeFour Operational Modes Point to Point Mode Repeater ModePoint to Multi Point Mode Using the Configuration MenuPage Page Device IP Setting Æ Ethernet AP Setting -- Wireless0 or Wireless1 Page Encryption Set Encryption to Open System Set Encryption to Open System/Shared Key Point to Point Mode Setting Æ Wireless0 or Wireless1 Point to Multi Point Mode Setting Æ Wireless0 or Wireless1 Page Repeater Mode Setting Æ Wireless0 or Wireless1 AP and Bridge Dual Radio Setting For Simultaneous OperationDhcp Server Setting Æ Dhcp Page WAN Setting Æ WAN WAN Status Æ WAN Status Admin setting Æ Admin Page Firewall setting Æ Firewall Page Virtual Server setting Æ Virtual Server Connection Status Firmware upgrade Æ Upgrade Reset System Æ Reset Frequency Band Specifications