Milan Technology MIL-SM801XX manual Speed Config

Page 24

Speed Config

In the Speed Configuration Page, you can configure the speed and duplex of each port.

Fig. 5-4. The Speed Config Page

To select the speed parameters for a port:

1.Select the drop-down menu in Speed/Duplex Column.

2.Select one of the following 6 Items: Auto/flow control enabled, Auto/flow control disabled, 100Base-Tx/Full Duplex, 100Base-Tx/Half Duplex, 10Base-T/Full Duplex, 10Base-T/Half Duplex.

3.Click Apply.

20

Image 24

Contents MIL-SM801xx Page Regulatory Approval Contents Introduction MIL-SM801XXFeatures Intelligent Management FeaturesPackage Contents Ethernet Switching Technology Package ContentsManagement Methods Console and Telnet ManagementWeb-based Management Snmp Network ManagementHardware Description Front PanelLED Indicators Front Panel of the MIL-SM801XX with MT-RJ connectorPower 100M Rear PanelDesktop Installation Attaching Rubber FeetNetwork Configuration Connecting the MIL-SM801XX to a terminal via RS-232 cableAssigning an IP Address to the switch MIL ip-address MIL 2Page Execute reboot Secured IP Resetting Factory Defaults Usage loaddefaultSystem Login Web-Based ManagementClick Login button, then the Password Dialog Box appears Network Setting System GroupStatistics StatisticsPort Configuration Speed Config Speed ConfigVlans Trunking TrunkingAgent Config Agent ConfigBoot Methods Specifications Standards Compliance LED IndicatorsDimensions WeightDiagnosing LED Indicators Incorrect connectionsCabling Appendix Browser Settings Page Page Page Page 90000374B