Milan Technology MIL-S3580 manual Switch Port Configuration Menu

Figure 4-12. Switch Port Configuration Menu

x Port Description - Sixteen characters can be entered to identify the port. x Administration State - When set to Disable, the port is inoperable and no

devices can access the switch through the port. The administrator must then enable the port in order for a link to be established.

x Speed and Duplex - There are five different settings that can be set for each port: Half-duplex-10Mbps, Full-duplex-10Mbps, Half-duplex-100Mbps, Full-duplex-100Mbps and Auto-negotiation.

x Flow Control - When enabled, pause frame is utilized for full duplex operations and backpressure flow control is utilized for half duplex. By default, this is enabled.

x Per-Port Priority – Four levels of priority (High, Medium, Low and Lowest) can be set to each individual port. However, the priority level set through QoS/Type of Service configuration in the Device Configuration Menu will have higher precedence.

55