
Rear Panel
The
Figure 2-3. Rear Panel of the MIL-S3580
Power On
After all network cables are connected, plug the power cord into the power socket on the back panel and the other end into a power outlet. Turn on the power using the power switch on the back panel.
Check the front panel power indicator to see if power is properly supplied. The switch uses a universal power supply that requires no additional adjustment.
Diagnostic Test
After the installation is completed and AC power is applied to the switch, the system will automatically perform a diagnostic test. The PWR LED will come on. Within 5 seconds, all LEDs will flash for a split second.
When the switch passes the
10