
Standard Commands
PPCBug Diagnostics Manual, listed in Appendix C, Related Documentation for complete descriptions of the diagnostic routines and instructions on how to invoke them.
3
| Table |
|
|
Test Group | Description |
|
|
EPIC | EPIC Timers Test |
|
|
PHB | PCI Bridge Revision Test |
|
|
RAM | RAM Tests (various) |
|
|
HOSTDMA | DMA Transfer Test |
|
|
RTC | MK48Txx Real Time Clock Tests |
|
|
UART | Serial Input/Output Tests (Register, IRQ, Baud, & Loopback) |
|
|
Z8536 | Z8536 Counter/Timer Tests* |
|
|
SCC | Serial Communications Controller (Z85C230) Tests* |
|
|
PAR8730x | Parallel Interface (PC8730x) Test* |
|
|
KBD8730x | PC8730x Keyboard/Mouse Tests* |
|
|
ISABRDGE | PCI/ISA Bridge Tests (Register Access & IRQ) |
|
|
VME3 | VME3 Tests (Register Read & Register Walking Bit) |
|
|
DEC | DEC21x43 Ethernet Controller Tests |
|
|
CL1283 | Parallel Interface (CL1283) Tests* |
|
|
Notes 1. You may enter command names in either uppercase or lowercase.
2.Some diagnostics depend on restart defaults that are set up only in a particular restart mode. Refer to the documentation on a particular diagnostic for the correct mode.
3.Test Sets marked with an asterisk (*) are not available on the MVME5100 (unless an IPMC712 or IPMC761 is mounted). The ISABRDGE test is only performed if an IPMC761 is mounted on the MVME5100. If the MVME5100 is operating in PMC mode (IPMC761 is not mounted), then the test suite is bypassed.
http://www.motorola.com/computer/literature |