Motorola Single Board Computer manual Standard Commands, Debugger Commands, Command Description

3

PPCBug Firmware

The string 'NULL' on a new line terminates the command line entries.

All PPCBug commands, except for the following, may be used within the command buffer: DU, ECHO, LO, TA, VE.

Note Interactive editing of the startup command buffer is not supported. If changes are needed to an existing set of startup commands, a new set of commands with changes must be reentered.

Standard Commands

The individual debugger commands are listed in the following table. The commands are described in detail in the PPCBug Firmware Package User’s Manual, listed in Appendix C, Related Documentation.

Note You can list all the available debugger commands by entering the Help (HE) command alone. You can view the syntax for a particular command by entering HE and the command mnemonic, as listed below.

	Table 3-1. Debugger Commands
Command	Description
AS	Assembler
BC	Block of Memory Compare
BF	Block of Memory Fill
BI	Block of Memory Initialize
BM	Block of Memory Move
BS	Block of Memory Search
BR	Breakpoint Insert
BV	Block of Memory Verify
CACHE	Modify Cache State
CM	Concurrent Mode

3-22 Computer Group Literature Center Web Site