D |
RAM500 Module Installation
that standoffs are installed in the three mounting holes on the module.
5.With standoffs installed in the three mounting holes on the RAM500 module, align the standoffs and the P1 connector on the module with the three holes and the J16 connector on the MVME5100 host board and press the two connectors together until they are firmly seated in place.
Figure D-2. RAM500 Module Placement on MVME5100
6.(Optional step) If a second RAM500 module is being used, align the top connector on the bottom RAM500 module with the bottom connector on the top RAM500 module and press the two connectors together until the connectors are seated in place.
7.Insert the three short Phillips screws through the holes at the corners of the RAM500 and screw them into the standoffs.
Computer Group Literature Center Web Site |
