Default Settings
Special PCI Slave Image Register = 00000000?
The configured value is written into the SLSI register of the Universe chip. |
| ||
Master Control Register = 80C00000? |
| ||
3 | |||
The configured value is written into the MAST_CTL register of the | |||
| |||
| |||
Universe chip. |
|
| |
Miscellaneous Control Register = 52060000? |
| ||
The configured value is written into the MISC_CTL register of the |
| ||
Universe chip. |
|
| |
User AM Codes = 00000000? |
| ||
The configured value is written into the USER_AM register of the |
| ||
Universe chip. |
|
| |
Firmware Command Buffer |
| ||
Firmware Command Buffer Enable = N? |
| ||
Y | Enables Firmware Command Buffer execution. |
| |
N | Disables Firmware Command Buffer execution |
| |
| (Default). |
|
Firmware Command Buffer Delay = 5?
Defines the number of seconds to wait before firmware begins executing the startup commands in the startup command buffer. During this delay, you may press any key to prevent the execution of the startup command buffer.
The default value of this parameter causes a startup delay of 5 seconds.
Firmware Command Buffer:
['NULL' terminates entry]?
The Firmware Command Buffer contents contain the BUG commands which are executed upon firmware startup.
BUG commands you place into the command buffer should be typed just as you enter the commands from the command line.
http://www.motorola.com/computer/literature |