Default Settings

Primary SCSI Data Bus Width [W/N] = N?

WWide SCSI (16-bit bus).

N

Narrow SCSI (8-bit bus). (Default)

3

 

 

 

 

 

Secondary SCSI identifier = 07?

Select the identifier. (Default = 07.)

NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?

YGive boot priority to devices defined in the fw-boot- path global environment variable (GEV).

NDo not give boot priority to devices listed in the fw- boot-pathGEV. (Default)

Note When enabled, the GEV boot takes priority over all other boots, including Autoboot and Network Boot.

NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?

YGive boot priority to devices defined in the fw-boot- path GEV at powerup reset only.

NGive powerup boot priority to devices listed in the fw- boot-pathGEV at any reset. (Default)

NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?

The time (in seconds) that a boot from the NVRAM boot list will delay before starting the boot. The purpose for the delay is to allow you the option of stopping the boot by use of the BREAK key. The time value is from 0-255 seconds. (Default = 5 seconds)

Auto Boot Enable [Y/N] = N?

YThe Autoboot function is enabled.

NThe Autoboot function is disabled. (Default)

http://www.motorola.com/computer/literature

3-11

Page 55
Image 55
Motorola MVME5100, Single Board Computer manual Select the identifier. Default =