Milan Technology E-FL-HB-0400 specifications Compliance Information, FL-HB-0800, E-FL-HB-0800SC

Page 1

COMPLIANCE INFORMATION

UL Listed

C-UL Listed (Canada)

CISPR/EN55022 Class A

FCC Regulations

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für entsprechende Gegenmaßnahmen werantwortlich ist.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l’utilsateur de prende les measures spécifiques appropriées

VCCI Class 1 Compliance

This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in commercial and/or industrial areas. When used in a residential area or in an adjacent area thereto, interference may be caused to radio and TV receivers, etc. Read the instructions for correct handling.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

Copyright Restrictions

© 1999 TRANSITION Networks.

All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks.

Printed in the U.S.A.

33160.A

Minneapolis, MN 55344 USA

10BASE-FL Ethernet

Unmanaged Fiber Hub with AUI, BNC or Fiber Uplink

E-FL-HB-0800, E-FL-HB-0400

USER’S GUIDE

The rack-mountable E-FL-HB-0800 and E-FL-HB-0400 series unmanaged Ethernet™ fiber hubs allow the network administrator to set up network workgroups connected over fiber and to install an OPTIONAL backbone uplink adapter connection to the workgroups through 10BASE-5 AUI, 10BASE-2 BNC OR 10BASE-FL ST fiber connectors.

E-FL-HB-0800, E-FL-HB-0800(SC)

BB

 

 

10BASE-FL

 

 

 

 

 

 

 

 

 

 

 

PWR

STAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COL

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

ACT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The E-FL-HB-0800 hub provides eight (8) Ethernet™ ST OR SC fiber connections to terminal devices plus space at the back for an optional backbone uplink adapter.

E-FL-HB-0400, E-FL-HB-0400(SC)

BB10BASE-FL

PWR

STAT

 

 

 

 

 

 

 

COL

1

2

3

4

1

2

3

4

ACT

 

 

 

 

 

 

 

The E-FL-HB-0400 hub provides four (4) Ethernet™ ST OR SC fiber connections to terminal devices plus space at the back for an optional backbone uplink adapter.

BACKBONE UPLINK ADAPTERS Optional devices ordered separately that, when installed, provide one of the following Ethernetbackbone uplink connections:

MA0A AUI connector to transceiver or to 10BASE-5 “thick-net” coaxial cable

MA0B BNC connector to 10BASE-2 “thin-net” coaxial cable

MA0F ST connector to multimode fiber

E-FL-HB-0x00 in the Network . . . . .2

Installation . . . . . . . . . . . . . . . . . . . .4

Operation . . . . . . . . . . . . . . . . . . . .11

Fault Isolation and Correction . . . .12

Cable Specifications . . . . . . . . . . . .14

Technical Specifications . . . . . . . . .15

Compliance Information . . . . . . . . .16

Image 1
Contents FL-HB-0800, E-FL-HB-0800SC Compliance InformationFL-HB-0400, E-FL-HB-0400SC Declaration of Conformity Technical Specifications10BASE-2 Cable Specifications Cable SpecificationsAUI/10BASE-5 Cable Specifications 10BASE-FL Cable SpecificationsOptionally Install Backbone Uplink Adapter InstallationYES Is one or more of the 10BASE-FL ACTivity LEDs illuminated?Is the PoWeR LED on the E-FL-HB-0x00 illuminated? Install E-FL-HB-0x00 at SiteIs the BackBone STATus LED illuminated continuously? Does the BackBone STATus LED continuously blink ONCE?Operation 10BASE-FL IndicatorsOptionally Connect to Backplane Through AUI UplinkThrough BNC Uplink Power the E-FL-HB-0x00To connect to 10BASE-2 network To cascade hubs by installing fiber cables between hubs Connect E-FL-0x00 Hub to Terminal Devices using FiberOptionally Cascade E-FL-0x00 Hubs Through Fiber Uplink